TEL: +86 15821399573
Product introduction
According to the standard of sulfo complex grease , T 106 F is added with special and functional additives and polymer materials, which makes it more conductive to producing high adhesion grease products. Added with the corresponding conversion compound additive , it can produce sulfo compound grease product with superior performances. This product can be widely used in equipment lubrication ,such as iron and steel, cement and other heavy-duty, humid and harsh conditions ,good characteristics are as following :
1, Excellent high temperature properties, dropping point is over 300 ℃, high using temperature, which can reach more than 180 ℃.
2, Excellent thermal stability, when decreased from a high temperature to normal temperature, it can be restored to the original structure.
3, Excellent corrosion resistance, a thickener possess anti-rust performance itself , so it has obvious rust resistance ability which can be used in wet environments.
4, Excellent anti-wear extreme pressure performance, a thickener is a kind of extreme pressure and anti-wear agents. With out adding any extreme pressure agents , the sintering load can be over 500kg, It is non-active and harmless to the environment, which make it is a kind of environmental grease.
5, Superior water resistance performance,its proportion is bigger than water,there is no significant change in its consistency when contacts with a lot of water.It has best performance under the wet or water washout situation .
6,Excellent mechanical stability,it has a longer bearing life in high temperature .
Product introduction
According to the standard of sulfo complex grease , T 106 F is added with special and functional additives and polymer materials, which makes it more conductive to producing high adhesion grease products. Added with the corresponding conversion compound additive , it can produce sulfo compound grease product with superior performances. This product can be widely used in equipment lubrication ,such as iron and steel, cement and other heavy-duty, humid and harsh conditions ,good characteristics are as following :
1, Excellent high temperature properties, dropping point is over 300 ℃, high using temperature, which can reach more than 180 ℃.
2, Excellent thermal stability, when decreased from a high temperature to normal temperature, it can be restored to the original structure.
3, Excellent corrosion resistance, a thickener possess anti-rust performance itself , so it has obvious rust resistance ability which can be used in wet environments.
4, Excellent anti-wear extreme pressure performance, a thickener is a kind of extreme pressure and anti-wear agents. With out adding any extreme pressure agents , the sintering load can be over 500kg, It is non-active and harmless to the environment, which make it is a kind of environmental grease.
5, Superior water resistance performance,its proportion is bigger than water,there is no significant change in its consistency when contacts with a lot of water.It has best performance under the wet or water washout situation .
6,Excellent mechanical stability,it has a longer bearing life in high temperature .
Specification
Components | Proportion | Characteristics |
T106F-1 | 95.60% | Calcium sulfonate |
Water | 4.4% | Conversion agent |
The consistency of the grease under this proportion is generally at 3 , customers can reconcile grease consistency according to the conditions and the demand requirements for grease; and also hydroxyl boron compound , adding antioxidants, preservatives, extreme pressure agents and solid fillers as well as other additives.
Process Description
1, Clean the sealed kettle , washed three times with the base oil.
2, Add T106F-1 and water to a sealed kettle in proportion , sealing the kettle and start to stir it .
3, Slowly add the materials to 88 ~ 94 ℃, after mixing three hours, using infrared detection products, until it shows 860-884 that amorphous calcium carbonate turns into crystalline calcium carbonate completely.
4, Open the drain valve, heat to 140 ~ 150 ℃ , dehydrate for 2 hours
5, Slowly add blend oil, reconcile grease consistency .
6, Cool it down to 90 ~ 100 ℃ and add desired additive .
Shanghai Minglan Chemical Co., Ltd.
Address: No.8885,Hutai Road ,Baoshan district, Shanghai,China
E-mail: info@lubeadditive.com
Sales Hotline: +86 15821399573
WhatsApp: +86 15821399573