E-mail

Password

 Register Forgot password?

TEL: +86 15821399573

Home 》 Engine oil additive package 》 ML-T6080 High reserve alkalinity engine coolant Additive Package
Product
ML-T6080 High reserve alkalinity engine coolant Additive Package

ML-T6080 High reserve alkalinity engine coolant Additive Package

Product Introduction

High reserve alkalinity silicone type liquid additive package for producing high quality engine coolant. Multi-chemical synergistic anti-corrosion inhibition technology, combined with bifunctional organosilicon corrosion inhibitor to achieve long-term anti-corrosion and avoid silicate washing out and coking, etc.

problem. Good protection for all metals (steel, iron, copper, aluminum, solder) in the engine cooling system.

It has the functions of anti-corrosion, anti-fouling, bacteriostasis, anti-foam, etc. The life of the finished coolant is 3 years and 100,000 kilometers.

Meet the requirements of standards NB / SH / T 0521-2010, JT225-1996, ASTM3306, and pass the new national standard GB / T29743-2013D.


0.00
0.00
  

Product Introduction

High reserve alkalinity silicone type liquid additive package for producing high quality engine coolant. Multi-chemical synergistic anti-corrosion inhibition technology, combined with bifunctional organosilicon corrosion inhibitor to achieve long-term anti-corrosion and avoid silicate washing out and coking, etc.

problem. Good protection for all metals (steel, iron, copper, aluminum, solder) in the engine cooling system.

It has the functions of anti-corrosion, anti-fouling, bacteriostasis, anti-foam, etc. The life of the finished coolant is 3 years and 100,000 kilometers.

Meet the requirements of standards NB / SH / T 0521-2010, JT225-1996, ASTM3306, and pass the new national standard GB / T29743-2013D.


Application

Suitable for the production of ethylene glycol-deionized water type light-load coolant alone: It can produce ethylene glycol-deionized water type heavy-load coolant after adding sodium molybdate dihydrate.

Among them, ethylene glycol is polyester grade, the content is ≥99.9%, and the conductivity of deionized water is ≤10u S / cm.

Finished coolant PH = 10.2-10.8. Suitable for all engine cooling systems for passenger cars, commercial vehicles, trucks, etc.

Reference dosage

T6080 is divided into liquid T6080A and liquid T6080B.

Production of concentrated coolant (LEC-I), please refer to the table below

Item

LEC-1

percentage

Ethylene glycol

940

94%

T6080A  （KG/MT）

56

5.6%

T6080B  （KG/MT）

4

0.4%

antifoam（ppm）

30

/

Blending Process for Concentrated coolant

1. According to the actual freezing point, add polyester-grade ethylene glycol cooling base fluid for use.

2. Add as proportion: base fluid 96% + T6080A: 56% + T6080B: 4%, mix and stir at room temperature for 15-20 minutes.

3. Add antifoam additive according to the ratio of 30PPM (30g / ton) and stir till transparent;

4. Check the product's freezing point, boiling point, pH value, foam tendency and other items.

5. Filtration (use a filter cloth or filter, and the pore size of the filter cloth is recommended to be no greater than 1 micron);

6. The finished product(concentrated coolant) can be obtained by filling.


Please contact us for detailed parameters
Free samples